Product Description
The new model wall plaster machine with anti-gray plate slope to send gray mode. It can quickly move, fast positioning, and go into and out of the narrow door, conveniently and quickly. Construction can be completely wiped to the top (1 mm nor left), and the machine can be manually controlled in any position to stop or add the ash. It can plaster the windows and the door's up and down, The distance is 50cm min, It can save 20% on materials.
Technical Parameter
|
Model |
Tup800 |
|
Plastering thickness |
2mm-30mm |
|
Plastering height |
≤5m |
|
Plastering width |
800mm-1000mm |
|
Efficiency |
560²/8h |
|
Dimension |
1250mm*800mm*850mm
2450mm*300mm*230mm |
|
Voltage |
220V or 380V |
|
Power |
1.5kw |
|
Total Weight |
270kg |
Details & Features
1. The automatic wall plastering machine utilizes the conveyor to take mortar forwardly and upwardly, the conveyor can take mortar or stop in any position by hand control. It can be rendered to the roof in all directions.
2. It can make the machine installation fast and stable The hydraulic telescopic rod can make the machine installation in 10 seconds.
3. There are min-vibrators after the spatula, thus there is no need to worry about hollowing and adhesion.
4. The rendering machine can save more than 20% of raw material (cement& sand).
5. The capacity is 15 professional plasterers.
Applications
1. Automatic wall plastering machine is the ideal equipment for residential buildings, office buildings, etc.
2. It can plaster on cement walls, brick and concrete walls, hollow walls, light body bricks, baking-free brick walls, etc.
3. The rendering material could be lime, cement mortar, foam mortar, gypsum, etc.
4. The rendering thickness is no more than 3 cm and the height could be up to 5m.
5. It could be adjusted to different thicknesses to suit each operation.
Working Principle
1. The problem of weak positioning is solved by hydraulic jacking and grounding. The positioning is fast and can be fixed vertically and flatly in about 10 seconds.
2. The use of two supports combined with traditional dotting solves the problems of slow laser positioning, difficulty in positioning, and large errors.
3. Use the conveyor belt to transport the ash forward and upward, combined with the large wiping plate that can change the angle, to wipe it completely to the top without leaving a millimeter.
4. Using a vibrator to enlarge the plasterboard solves the problem of hollowing and cracking in artificial plaster walls. The maximum plaster thickness on water-absorbent walls can reach 3 cm, and the minimum plaster thickness is 0.3 cm.
5. The use of a trowel that can change the angle solves the problem of the machine not being able to descend along the original path for calendaring.
6. The use of pull-out rods makes it easier for you to connect freely at different heights. It also solves the problem that the telescopic rod cannot pass through the construction hole. Moreover, when the machine is on the construction site, it can be used by plugging in the vertical rod without assembly. It can be transported by removing the pole, no disassembly is required.
7. The working surface of the machine is 80 centimeters wide. If you wipe 80 or 80 centimeters on a wall and the remaining 20, 30 or 50 centimeters are left, you only need to fill one side without adjustment or blocking. Because it has been in the sand and dust for a long time, any adjustment or blocking is impossible.
8. The conveyor belt of the machine can be stopped alone. For example, after passing through the construction hole and then sending ash, it can be wiped above the construction hole.
9. Use the matching limit clamp and clamp it to the same height as the lintel to wipe the bottom of the lintel. In the same way, use both hands to press the two sticks that change the angle of the wiper to the bottom of the window, and you can wipe the bottom of the window.
10. The wiping plate is designed to be wider than the fuselage, so the inner and outer corners can be easily positioned.
Advantages
This machine is a special equipment for plastering interior walls of residential buildings and office buildings. Walls that can be wiped include cement walls, brick-concrete walls, hollow walls, unburned brick walls, red brick walls, foam brick walls, etc. Applicable ash includes white sand ash, cement ash, cement powder, dry powder mortar, dry mixed mortar, stone powder, gypsum, white sand ash, foamed mortar, etc.
Wall plastering machine operating steps
Dot the wall (the middle point is 1.6m from the ground, the bottom point is 400px from the ground, and a point is made every 1.5m), do it one day in advance.
Wall watering (brick walls). Make it a day ahead
Measure the height of the room and add appropriate connectors. (The vertical poles in the machine are for a room height of 2.85 meters. If the room is high, corresponding joints must be added)
Install the pole. (Two people install, make sure the threaded links are flat)
Install handles. (The handles are divided into left and right parts)
Connect the power supply. If the power indicator light stays on, it means the three-phase power supply is correct. If the light turns on and then goes out, the power input is reversed.
Click the up button to raise the machine pole 1-50px from the ceiling
Lock the hydraulic pressure and pull up the handle
Positioning (one person holds the middle bar, the other person holds the support and steps on the hydraulic pressure)
Step on the hydraulic pressure, the vertical pole rises and presses against the ceiling, and the machine is fixed.
Add gray, click the start button and the machine will rise
After the machine reaches the top, vibrate for 5-7 seconds, turn off the power, then turn on the power again, the machine will descend and calender the wall.
After the machine reaches the bottom, release the hydraulic pressure
Click the drop button (it can drop by 50px), and the pole will drop.
Move the machine (make the machine plaster plate close to the wall and translate the machine) so that there is a distance of 50px between the two walls.
Reposition and work on the second wall.
Clean the machine in time every day after use. Disconnect power before cleaning.
The ash bucket board and vibrator parts are directly flushed with water pipes. It is forbidden to flush the machine panel with water and can only be wiped with a cloth.
Application scope.
Wall plaster machine cleaning
cleaning method:
Washing focus: inside and outside of the conveyor belt, vibrator, front and rear of the formwork, ash hopper, hydraulic casing, climbing wheel, caster, and surface washing. 1. If there is sand and dust on the vertical pole, use a woven bag dipped in water to clean it up and down. 2. If there is sand and dust on the nylon wheel, pull out the vertical pole, use hydraulic pressure to punch out two sleeves, and wash them with high-pressure water.
Wall plaster machine maintenance
The guide column in the oil window, the movable part of the wiper plate turning lever, the clutch plate of the electromagnetic clutch, the hydraulic sleeve, the chain, the wire rope, and all the solid wires must be oiled once a day.
Packing & Shipping
Our Company
Our company was established in 2019 and is a professional company specializing in equipment products. We focus on providing high-quality equipment to customers from all walks of life and are committed to promoting the progress and development of industrial production through technological innovation and product optimization.
Since our establishment, we have always adhered to the customer-centered approach, constantly deepening our understanding of market needs, and continuously improving and optimizing our products based on customer feedback and opinions. Our equipment is widely used in construction, transportation, energy, environmental protection, and other fields, and is highly praised and trusted by customers.
Our team is composed of a group of professionals in the equipment field. They not only have rich technical knowledge and industry experience but also always maintain an innovative and enterprising spirit to provide strong support for the company's continued development.
We have achieved several major achievements and honors with our excellent product quality and service levels. At the same time, we have also accumulated rich experience and resources, laying a solid foundation for future development.
Facing the future, we will continue to adhere to technological innovation and product optimization, and continuously improve product quality and service levels to meet the evolving needs of customers. At the same time, we will also actively expand the market, seek more cooperation opportunities, and work hand in hand with more customers to create a better future.
Our team
Certification
FAQ
1. Are you a manufacturer?
Yes. We are one of the leading manufacturers
2. Do you have Stock productions to sell?
Yes, of course. But we also offer OEM service. Please send us some drawings.
3. What information do you want to know if I want to get a quotation?
a). The model/size of your products.
b). The application for your products.
c). Special package methods if you need them.
d). Raw material.
4. Do you inspect the finished products?
Yes. Each step of products will be carried out inspection by the QC department until shipping
5. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
6. what can you buy from us?
Engineering & Construction Machinery, Metal forming equipment, agricultural machinery, Garden machinery, construction machinery
7. why should you buy from us not from other suppliers?
The company is mainly in industrial processing and manufacturing. It is an entity factory integrating R & D, production, and sales. It has 12 years of design and R&D experience and currently has 15 R&D engineers.
Why Choose Us
1. 24-hour online service, Chinese, English, Spanish, French, German, and Russian support, and technical guidance.
2. When meeting a machine failure problem, our factory will ensure that the problem is solved within 1 hour.
3. Provide machine install video.
4. Provide logistics information, like shipping by sea, shipping by express DHL, FEDEX delivery, and real-time tracking service.
5. If the machine is broken to non-human causes, a new device will be provided or new parts will be provided.
){kind=link}